Fabricated in a variety of durable materials, the THT-100 Series turnstile gate provides dependable access control even in unsupervised locations.

Available models

• Three-wing turnstile gate provides access control to unsupervised installations
• Rugged construction ensures trouble-free performance and durability
• Heavy duty mechanism can be mechanical with optional self-centering or electrical with standard self-centering: a second set of electrical controls can be added for exit
• Available in any combination of fail-lock or fail-safe on electric versions: all fail-lock applications automatically include a mechanical key release to allow manual override in an emergency
• Fabricated from hot-dipped galvanized steel (THT-100C, EC) or powder coated steel (THT-100CP, ECP)
• Three rotor sections for 120-degrees of passage space allow for greater comfort in use
• Bottom thrust bearing is dust and moisture proof
• Open construction shield minimizes claustrophobic effect and increases visual security
• Low voltage 24 VDC operating system requires normally open, momentary, dry contact to release turnstile gate

• Three-wing turnstile gate provides access control to unsupervised installations
• Rugged construction ensures trouble-free performance and durability
• Heavy duty mechanism can be mechanical with optional self-centering or electrical with standard self-centering: a second set of electrical controls can be added for exit
• Available in any combination of fail-lock or fail-safe on electric versions: all fail-lock applications automatically include a mechanical key release to allow manual override in an emergency
• Fabricated from anodized aluminum with stainless steel arms (THT-100A, EA) or complete stainless steel (THT-100S, ES)
• Three rotor sections for 120-degrees of passage space allow greater comfort in use
• Bottom thrust bearing is dust and moisture proof
• Open construction shield minimizes claustrophobic effect and increases visual security
• Low voltage 24 VDC operating system requires normally open, momentary, dry contact to release turnstile gate

• Three-wing turnstile gate provides handicap access to installations where a gate is not preferred
• Rugged construction ensures trouble-free performance and durability
• Manufactured from galvanized carbon steel (THT-100HGC, HGEC), powder coated carbon steel (THT-100HGCP, HGECP) or complete stainless steel (THT-100HGS, HGES)
• Mechanism can be mechanically or electrically operated
• Any combination of fail-lock or fail-safe is available on electric versions: all fail-lock applications automatically include a mechanical key release to allow manual override in an emergency
• Three rotor sections 120-degrees apart with 47" arms for handicap access
• 24 VDC electrical operating system requires a momentary normally open dry contact to release the turnstile gate
• Hydraulic cushioning unit and self-centering mechanism are included with all electrical units

• Combines the functions of two single rotor turnstiles into one turnstile gate
• Intermeshing of left and right-hand rotors allows reduction in overall width from 10 feet (two single rotor turnstile gates) to 8 feet with a space saving double gate, with no reduction of passage space; 7-foot version also is available for applications with minimal entry space
• Construction of all double gates matches single rotor turnstile gates
• Manufactured from galvanized carbon steel (THT-100TC) or powder coated carbon steel (THT-100TCP)
• Three rotor section turnstiles include fully welded middle-barrier to prevent unauthorized entry through midsection of turnstile gate
• Double gate can have up to four control points, two entries and two exits
• Each rotor can be supplied with electrical operation in one or two directions
• Any combination of fail-lock or fail-safe is available on electric versions: all fail-lock applications automatically include a mechanical key release to allow manual override in an emergency

• Combines the functions of two single rotor turnstiles into one turnstile gate
• Intermeshing of left and right-hand rotors allows reduction in overall width from 10 feet (two single rotor turnstile gates) to 8 feet with a space saving double gate, with no reduction of passage space; 7-foot version also is available for applications with minimal entry space
• Construction of all double gates matches single rotor turnstile gates
• Fabricated from anodized aluminum with stainless steel arms (THT-100TA) or complete stainless steel (THT-100TS)
• Three rotor section turnstiles include fully welded middle-barrier to prevent unauthorized entry through midsection of turnstile gate
• Double gate can have up to four control points, two entries and two exits
• Each rotor can be supplied with electrical operation in one or two directions
• Any combination of fail-lock or fail-safe is available on electric versions: all fail-lock applications automatically include a mechanical key release to allow manual override in an emergency

• Four-wing turnstile gate provides security for sensitive areas where piggybacking and material removal are serious concerns
• 90-degree entry area reduces available passage space
• Rugged construction ensures long life and trouble-free performance
• Mechanism can be mechanical or self-centering and electrically operated. A second set of electrical controls can be added for exit
• Any combination of fail-lock or fail-safe is available on electric versions: all fail-lock applications automatically include a mechanical key release to allow manual override in an emergency
• Fabricated from hot-dipped galvanized steel (THT-100C4, EC4), powder coated steel (THT-100CP4, ECP4), anodized aluminum with stainless steel arms (THT-100A4, EA4) or complete stainless steel (THT-100S4, ES4)
• Bottom thrust bearing is dust and moisture proof
• Low voltage 24 VDC operating system requires normally open, momentary, dry contact to release turnstile gate